If you are going to purchase a hydraulic pump for the first time, you need to consider a lot of factors, such as maximum pressure, noise level, hand power, just to name a few. In other words, you need to consider your needs and the way you are going to operate the pump. Given below is a description of a few features that you must consider before purchasing this unit for the first. Read on to find out more.
1. Hydraulic Fluid Viscosity
Fluid viscosity is the term used to describe the thickness of the liquid. With this figure, you can get a better idea of the performance of your hydraulic pump. The majority of farms feature a maximum kinematics viscosity score, which you must follow.
If the viscosity is too low, it can have a negative impact on the efficiency of the unit. Similarly, excessive viscosity may also result in mechanical problems.
2. Fluid Type
It is important to keep in mind that the type of fluid that your hydraulic system uses should also match the specifications of the pump. The majority of pumps out there support only standard hydraulic fluid. Generally, this fluid is based on the mineral oil. Typically, it has good lubrication properties and a relatively higher boiling point.
So, what you need to do is go for a unit based on the type of fluid that is used in your system.
3. Flow Rate
If you want to figure out the flow rate, you need to consider the three parameters given below:
Displacement value
The efficiency of the pump
Speed of the pump in RPM
Generally, the flow ratings of the pump are given in gallons per minute. Based on this figure, you can find out how much fluid they can move in a given period of time to cover your needs.
4. Power Curves or Torque Ratings
If you want to get a better idea of the power of the pump, you need to consider two elements: Rotational speed and torque. If you want to determine your power needs, you need to focus on the torque value.
If you are looking for the easiest method to go for the required torque level, you need to get the best machine.
5. Speed
The operating speed of the pump is given in RPM made by the drive shaft. Based on the design of the pump, it may either offer higher or lower speeds.
6. Max Operating Pressure
Generally, hydraulic pumps are designed to perform their best when the operating pressure is ideal. If the operating pressure is too low or too high, the pump won't be able to create pressure. Therefore, you need to consider this element before you go for a pump.
7. Maintenance Time and Costs
Lastly you need to consider the maintenance time and cost of the hydraulic pump you are going to purchase. Some of these units are costly to maintain, which is why they may not be an ideal choice for you.
Long story short, you need to consider these 7 features before you invest in your desired hydraulic pump for the first time.
No comments:
Post a Comment